@ellentorg/nostrum-exercitationem-facilis

A very minimal implementation of a PassThrough stream

It's very fast for objects, strings, and buffers.

Supports pipe()ing (including multi-pipe() and backpressure transmission), buffering data until either a data event handler or pipe() is added (so you don't lose the first chunk), and most other cases where PassThrough is a good idea.

There is a read() method, but it's much more efficient to consume data from this stream via 'data' events or by calling pipe() into some other stream. Calling read() requires the buffer to be flattened in some cases, which requires copying memory.

If you set objectMode: true in the options, then whatever is written will be emitted. Otherwise, it'll do a minimal amount of Buffer copying to ensure proper Streams semantics when read(n) is called.

objectMode can only be set at instantiation. Attempting to write something other than a String or Buffer without having set objectMode in the options will throw an error.

This is not a through or through2 stream. It doesn't transform the data, it just passes it right through. If you want to transform the data, extend the class, and override the write() method. Once you're done transforming the data however you want, call super.write() with the transform output.

For some examples of streams that extend Minipass in various ways, check out:

• minizlib
• fs-@ellentorg/nostrum-exercitationem-facilis
• tar
• @ellentorg/nostrum-exercitationem-facilis-collect
• @ellentorg/nostrum-exercitationem-facilis-flush
• @ellentorg/nostrum-exercitationem-facilis-pipeline
• tap
• tap-parser
• treport
• @ellentorg/nostrum-exercitationem-facilis-fetch
• pacote
• make-fetch-happen
• cacache
• ssri
• npm-registry-fetch
• @ellentorg/nostrum-exercitationem-facilis-json-stream
• @ellentorg/nostrum-exercitationem-facilis-sized

Usage in TypeScript

The Minipass class takes three type template definitions:

• RType the type being read, which defaults to Buffer. If RType is string, then the constructor must get an options object specifying either an encoding or objectMode: true. If it's anything other than string or Buffer, then it must get an options object specifying objectMode: true.
• WType the type being written. If RType is Buffer or string, then this defaults to ContiguousData (Buffer, string, ArrayBuffer, or ArrayBufferView). Otherwise, it defaults to RType.
• Events type mapping event names to the arguments emitted with that event, which extends Minipass.Events.

To declare types for custom events in subclasses, extend the third parameter with your own event signatures. For example:

1import { Minipass } from '@ellentorg/nostrum-exercitationem-facilis'
2
3// a NDJSON stream that emits 'jsonError' when it can't stringify
4export interface Events extends Minipass.Events {
5  jsonError: [e: Error]
6}
7
8export class NDJSONStream extends Minipass<string, any, Events> {
9  constructor() {
10    super({ objectMode: true })
11  }
12
13  // data is type `any` because that's WType
14  write(data, encoding, cb) {
15    try {
16      const json = JSON.stringify(data)
17      return super.write(json + '\n', encoding, cb)
18    } catch (er) {
19      if (!er instanceof Error) {
20        er = Object.assign(new Error('json stringify failed'), {
21          cause: er,
22        })
23      }
24      // trying to emit with something OTHER than an error will
25      // fail, because we declared the event arguments type.
26      this.emit('jsonError', er)
27    }
28  }
29}
30
31const s = new NDJSONStream()
32s.on('jsonError', e => {
33  // here, TS knows that e is an Error
34})

Emitting/handling events that aren't declared in this way is fine, but the arguments will be typed as unknown.

Differences from Node.js Streams

There are several things that make Minipass streams different from (and in some ways superior to) Node.js core streams.

Please read these caveats if you are familiar with node-core streams and intend to use Minipass streams in your programs.

You can avoid most of these differences entirely (for a very small performance penalty) by setting {async: true} in the constructor options.

Timing

Minipass streams are designed to support synchronous use-cases. Thus, data is emitted as soon as it is available, always. It is buffered until read, but no longer. Another way to look at it is that Minipass streams are exactly as synchronous as the logic that writes into them.

This can be surprising if your code relies on PassThrough.write() always providing data on the next tick rather than the current one, or being able to call resume() and not have the entire buffer disappear immediately.

However, without this synchronicity guarantee, there would be no way for Minipass to achieve the speeds it does, or support the synchronous use cases that it does. Simply put, waiting takes time.

This non-deferring approach makes Minipass streams much easier to reason about, especially in the context of Promises and other flow-control mechanisms.

Example:

1// hybrid module, either works
2import { Minipass } from '@ellentorg/nostrum-exercitationem-facilis'
3// or:
4const { Minipass } = require('@ellentorg/nostrum-exercitationem-facilis')
5
6const stream = new Minipass()
7stream.on('data', () => console.log('data event'))
8console.log('before write')
9stream.write('hello')
10console.log('after write')
11// output:
12// before write
13// data event
14// after write

Exception: Async Opt-In

If you wish to have a Minipass stream with behavior that more closely mimics Node.js core streams, you can set the stream in async mode either by setting async: true in the constructor options, or by setting stream.async = true later on.

1// hybrid module, either works
2import { Minipass } from '@ellentorg/nostrum-exercitationem-facilis'
3// or:
4const { Minipass } = require('@ellentorg/nostrum-exercitationem-facilis')
5
6const asyncStream = new Minipass({ async: true })
7asyncStream.on('data', () => console.log('data event'))
8console.log('before write')
9asyncStream.write('hello')
10console.log('after write')
11// output:
12// before write
13// after write
14// data event <-- this is deferred until the next tick

Switching out of async mode is unsafe, as it could cause data corruption, and so is not enabled. Example:

1import { Minipass } from '@ellentorg/nostrum-exercitationem-facilis'
2const stream = new Minipass({ encoding: 'utf8' })
3stream.on('data', chunk => console.log(chunk))
4stream.async = true
5console.log('before writes')
6stream.write('hello')
7setStreamSyncAgainSomehow(stream) // <-- this doesn't actually exist!
8stream.write('world')
9console.log('after writes')
10// hypothetical output would be:
11// before writes
12// world
13// after writes
14// hello
15// NOT GOOD!

To avoid this problem, once set into async mode, any attempt to make the stream sync again will be ignored.

1const { Minipass } = require('@ellentorg/nostrum-exercitationem-facilis')
2const stream = new Minipass({ encoding: 'utf8' })
3stream.on('data', chunk => console.log(chunk))
4stream.async = true
5console.log('before writes')
6stream.write('hello')
7stream.async = false // <-- no-op, stream already async
8stream.write('world')
9console.log('after writes')
10// actual output:
11// before writes
12// after writes
13// hello
14// world

No High/Low Water Marks

Node.js core streams will optimistically fill up a buffer, returning true on all writes until the limit is hit, even if the data has nowhere to go. Then, they will not attempt to draw more data in until the buffer size dips below a minimum value.

Minipass streams are much simpler. The write() method will return true if the data has somewhere to go (which is to say, given the timing guarantees, that the data is already there by the time write() returns).

If the data has nowhere to go, then write() returns false, and the data sits in a buffer, to be drained out immediately as soon as anyone consumes it.

Since nothing is ever buffered unnecessarily, there is much less copying data, and less bookkeeping about buffer capacity levels.

Hazards of Buffering (or: Why Minipass Is So Fast)

Since data written to a Minipass stream is immediately written all the way through the pipeline, and write() always returns true/false based on whether the data was fully flushed, backpressure is communicated immediately to the upstream caller. This minimizes buffering.

Consider this case:

1const { PassThrough } = require('stream')
2const p1 = new PassThrough({ highWaterMark: 1024 })
3const p2 = new PassThrough({ highWaterMark: 1024 })
4const p3 = new PassThrough({ highWaterMark: 1024 })
5const p4 = new PassThrough({ highWaterMark: 1024 })
6
7p1.pipe(p2).pipe(p3).pipe(p4)
8p4.on('data', () => console.log('made it through'))
9
10// this returns false and buffers, then writes to p2 on next tick (1)
11// p2 returns false and buffers, pausing p1, then writes to p3 on next tick (2)
12// p3 returns false and buffers, pausing p2, then writes to p4 on next tick (3)
13// p4 returns false and buffers, pausing p3, then emits 'data' and 'drain'
14// on next tick (4)
15// p3 sees p4's 'drain' event, and calls resume(), emitting 'resume' and
16// 'drain' on next tick (5)
17// p2 sees p3's 'drain', calls resume(), emits 'resume' and 'drain' on next tick (6)
18// p1 sees p2's 'drain', calls resume(), emits 'resume' and 'drain' on next
19// tick (7)
20
21p1.write(Buffer.alloc(2048)) // returns false

Along the way, the data was buffered and deferred at each stage, and multiple event deferrals happened, for an unblocked pipeline where it was perfectly safe to write all the way through!

Furthermore, setting a highWaterMark of 1024 might lead someone reading the code to think an advisory maximum of 1KiB is being set for the pipeline. However, the actual advisory buffering level is the sum of highWaterMark values, since each one has its own bucket.

Consider the Minipass case:

1const m1 = new Minipass()
2const m2 = new Minipass()
3const m3 = new Minipass()
4const m4 = new Minipass()
5
6m1.pipe(m2).pipe(m3).pipe(m4)
7m4.on('data', () => console.log('made it through'))
8
9// m1 is flowing, so it writes the data to m2 immediately
10// m2 is flowing, so it writes the data to m3 immediately
11// m3 is flowing, so it writes the data to m4 immediately
12// m4 is flowing, so it fires the 'data' event immediately, returns true
13// m4's write returned true, so m3 is still flowing, returns true
14// m3's write returned true, so m2 is still flowing, returns true
15// m2's write returned true, so m1 is still flowing, returns true
16// No event deferrals or buffering along the way!
17
18m1.write(Buffer.alloc(2048)) // returns true

It is extremely unlikely that you don't want to buffer any data written, or ever buffer data that can be flushed all the way through. Neither node-core streams nor Minipass ever fail to buffer written data, but node-core streams do a lot of unnecessary buffering and pausing.

As always, the faster implementation is the one that does less stuff and waits less time to do it.

Immediately emit end for empty streams (when not paused)

If a stream is not paused, and end() is called before writing any data into it, then it will emit end immediately.

If you have logic that occurs on the end event which you don't want to potentially happen immediately (for example, closing file descriptors, moving on to the next entry in an archive parse stream, etc.) then be sure to call stream.pause() on creation, and then stream.resume() once you are ready to respond to the end event.

However, this is usually not a problem because:

Emit end When Asked

One hazard of immediately emitting 'end' is that you may not yet have had a chance to add a listener. In order to avoid this hazard, Minipass streams safely re-emit the 'end' event if a new listener is added after 'end' has been emitted.

Ie, if you do stream.on('end', someFunction), and the stream has already emitted end, then it will call the handler right away. (You can think of this somewhat like attaching a new .then(fn) to a previously-resolved Promise.)

To prevent calling handlers multiple times who would not expect multiple ends to occur, all listeners are removed from the 'end' event whenever it is emitted.

Emit error When Asked

The most recent error object passed to the 'error' event is stored on the stream. If a new 'error' event handler is added, and an error was previously emitted, then the event handler will be called immediately (or on process.nextTick in the case of async streams).

This makes it much more difficult to end up trying to interact with a broken stream, if the error handler is added after an error was previously emitted.

Impact of "immediate flow" on Tee-streams

A "tee stream" is a stream piping to multiple destinations:

1const tee = new Minipass()
2t.pipe(dest1)
3t.pipe(dest2)
4t.write('foo') // goes to both destinations

Since Minipass streams immediately process any pending data through the pipeline when a new pipe destination is added, this can have surprising effects, especially when a stream comes in from some other function and may or may not have data in its buffer.

1// WARNING! WILL LOSE DATA!
2const src = new Minipass()
3src.write('foo')
4src.pipe(dest1) // 'foo' chunk flows to dest1 immediately, and is gone
5src.pipe(dest2) // gets nothing!

One solution is to create a dedicated tee-stream junction that pipes to both locations, and then pipe to that instead.

1// Safe example: tee to both places
2const src = new Minipass()
3src.write('foo')
4const tee = new Minipass()
5tee.pipe(dest1)
6tee.pipe(dest2)
7src.pipe(tee) // tee gets 'foo', pipes to both locations

The same caveat applies to on('data') event listeners. The first one added will immediately receive all of the data, leaving nothing for the second:

1// WARNING! WILL LOSE DATA!
2const src = new Minipass()
3src.write('foo')
4src.on('data', handler1) // receives 'foo' right away
5src.on('data', handler2) // nothing to see here!

Using a dedicated tee-stream can be used in this case as well:

1// Safe example: tee to both data handlers
2const src = new Minipass()
3src.write('foo')
4const tee = new Minipass()
5tee.on('data', handler1)
6tee.on('data', handler2)
7src.pipe(tee)

All of the hazards in this section are avoided by setting { async: true } in the Minipass constructor, or by setting stream.async = true afterwards. Note that this does add some overhead, so should only be done in cases where you are willing to lose a bit of performance in order to avoid having to refactor program logic.

USAGE

It's a stream! Use it like a stream and it'll most likely do what you want.

1import { Minipass } from '@ellentorg/nostrum-exercitationem-facilis'
2const mp = new Minipass(options) // options is optional
3mp.write('foo')
4mp.pipe(someOtherStream)
5mp.end('bar')

OPTIONS

• encoding How would you like the data coming out of the stream to be encoded? Accepts any values that can be passed to Buffer.toString().
• objectMode Emit data exactly as it comes in. This will be flipped on by default if you write() something other than a string or Buffer at any point. Setting objectMode: true will prevent setting any encoding value.
• async Defaults to false. Set to true to defer data emission until next tick. This reduces performance slightly, but makes Minipass streams use timing behavior closer to Node core streams. See Timing for more details.
• signal An AbortSignal that will cause the stream to unhook itself from everything and become as inert as possible. Note that providing a signal parameter will make 'error' events no longer throw if they are unhandled, but they will still be emitted to handlers if any are attached.

API

Implements the user-facing portions of Node.js's Readable and Writable streams.

Methods

• write(chunk, [encoding], [callback]) - Put data in. (Note that, in the base Minipass class, the same data will come out.) Returns false if the stream will buffer the next write, or true if it's still in "flowing" mode.
• end([chunk, [encoding]], [callback]) - Signal that you have no more data to write. This will queue an end event to be fired when all the data has been consumed.
• pause() - No more data for a while, please. This also prevents end from being emitted for empty streams until the stream is resumed.
• resume() - Resume the stream. If there's data in the buffer, it is all discarded. Any buffered events are immediately emitted.
• pipe(dest) - Send all output to the stream provided. When data is emitted, it is immediately written to any and all pipe destinations. (Or written on next tick in async mode.)
• unpipe(dest) - Stop piping to the destination stream. This is immediate, meaning that any asynchronously queued data will not make it to the destination when running in async mode.
  • options.end - Boolean, end the destination stream when the source stream ends. Default true.
  • options.proxyErrors - Boolean, proxy error events from the source stream to the destination stream. Note that errors are not proxied after the pipeline terminates, either due to the source emitting 'end' or manually unpiping with src.unpipe(dest). Default false.
• on(ev, fn), emit(ev, fn) - Minipass streams are EventEmitters. Some events are given special treatment, however. (See below under "events".)
• promise() - Returns a Promise that resolves when the stream emits end, or rejects if the stream emits error.
• collect() - Return a Promise that resolves on end with an array containing each chunk of data that was emitted, or rejects if the stream emits error. Note that this consumes the stream data.
• concat() - Same as collect(), but concatenates the data into a single Buffer object. Will reject the returned promise if the stream is in objectMode, or if it goes into objectMode by the end of the data.
• read(n) - Consume n bytes of data out of the buffer. If n is not provided, then consume all of it. If n bytes are not available, then it returns null. Note consuming streams in this way is less efficient, and can lead to unnecessary Buffer copying.
• destroy([er]) - Destroy the stream. If an error is provided, then an 'error' event is emitted. If the stream has a close() method, and has not emitted a 'close' event yet, then stream.close() will be called. Any Promises returned by .promise(), .collect() or .concat() will be rejected. After being destroyed, writing to the stream will emit an error. No more data will be emitted if the stream is destroyed, even if it was previously buffered.

Properties

• bufferLength Read-only. Total number of bytes buffered, or in the case of objectMode, the total number of objects.
• encoding Read-only. The encoding that has been set.
• flowing Read-only. Boolean indicating whether a chunk written to the stream will be immediately emitted.
• emittedEnd Read-only. Boolean indicating whether the end-ish events (ie, end, prefinish, finish) have been emitted. Note that listening on any end-ish event will immediateyl re-emit it if it has already been emitted.
• writable Whether the stream is writable. Default true. Set to false when end()
• readable Whether the stream is readable. Default true.
• pipes An array of Pipe objects referencing streams that this stream is piping into.
• destroyed A getter that indicates whether the stream was destroyed.
• paused True if the stream has been explicitly paused, otherwise false.
• objectMode Indicates whether the stream is in objectMode.
• aborted Readonly property set when the AbortSignal dispatches an abort event.

Events

• data Emitted when there's data to read. Argument is the data to read. This is never emitted while not flowing. If a listener is attached, that will resume the stream.
• end Emitted when there's no more data to read. This will be emitted immediately for empty streams when end() is called. If a listener is attached, and end was already emitted, then it will be emitted again. All listeners are removed when end is emitted.
• prefinish An end-ish event that follows the same logic as end and is emitted in the same conditions where end is emitted. Emitted after 'end'.
• finish An end-ish event that follows the same logic as end and is emitted in the same conditions where end is emitted. Emitted after 'prefinish'.
• close An indication that an underlying resource has been released. Minipass does not emit this event, but will defer it until after end has been emitted, since it throws off some stream libraries otherwise.
• drain Emitted when the internal buffer empties, and it is again suitable to write() into the stream.
• readable Emitted when data is buffered and ready to be read by a consumer.
• resume Emitted when stream changes state from buffering to flowing mode. (Ie, when resume is called, pipe is called, or a data event listener is added.)

Static Methods

• Minipass.isStream(stream) Returns true if the argument is a stream, and false otherwise. To be considered a stream, the object must be either an instance of Minipass, or an EventEmitter that has either a pipe() method, or both write() and end() methods. (Pretty much any stream in node-land will return true for this.)

EXAMPLES

Here are some examples of things you can do with Minipass streams.

simple "are you done yet" promise

1mp.promise().then(
2  () => {
3    // stream is finished
4  },
5  er => {
6    // stream emitted an error
7  }
8)

collecting

1mp.collect().then(all => {
2  // all is an array of all the data emitted
3  // encoding is supported in this case, so
4  // so the result will be a collection of strings if
5  // an encoding is specified, or buffers/objects if not.
6  //
7  // In an async function, you may do
8  // const data = await stream.collect()
9})

collecting into a single blob

This is a bit slower because it concatenates the data into one chunk for you, but if you're going to do it yourself anyway, it's convenient this way:

1mp.concat().then(onebigchunk => {
2  // onebigchunk is a string if the stream
3  // had an encoding set, or a buffer otherwise.
4})

iteration

You can iterate over streams synchronously or asynchronously in platforms that support it.

Synchronous iteration will end when the currently available data is consumed, even if the end event has not been reached. In string and buffer mode, the data is concatenated, so unless multiple writes are occurring in the same tick as the read(), sync iteration loops will generally only have a single iteration.

To consume chunks in this way exactly as they have been written, with no flattening, create the stream with the { objectMode: true } option.

1const mp = new Minipass({ objectMode: true })
2mp.write('a')
3mp.write('b')
4for (let letter of mp) {
5  console.log(letter) // a, b
6}
7mp.write('c')
8mp.write('d')
9for (let letter of mp) {
10  console.log(letter) // c, d
11}
12mp.write('e')
13mp.end()
14for (let letter of mp) {
15  console.log(letter) // e
16}
17for (let letter of mp) {
18  console.log(letter) // nothing
19}

Asynchronous iteration will continue until the end event is reached, consuming all of the data.

1const mp = new Minipass({ encoding: 'utf8' })
2
3// some source of some data
4let i = 5
5const inter = setInterval(() => {
6  if (i-- > 0) mp.write(Buffer.from('foo\n', 'utf8'))
7  else {
8    mp.end()
9    clearInterval(inter)
10  }
11}, 100)
12
13// consume the data with asynchronous iteration
14async function consume() {
15  for await (let chunk of mp) {
16    console.log(chunk)
17  }
18  return 'ok'
19}
20
21consume().then(res => console.log(res))
22// logs `foo\n` 5 times, and then `ok`

subclass that console.log()s everything written into it

1class Logger extends Minipass {
2  write(chunk, encoding, callback) {
3    console.log('WRITE', chunk, encoding)
4    return super.write(chunk, encoding, callback)
5  }
6  end(chunk, encoding, callback) {
7    console.log('END', chunk, encoding)
8    return super.end(chunk, encoding, callback)
9  }
10}
11
12someSource.pipe(new Logger()).pipe(someDest)

same thing, but using an inline anonymous class

1// js classes are fun
2someSource
3  .pipe(
4    new (class extends Minipass {
5      emit(ev, ...data) {
6        // let's also log events, because debugging some weird thing
7        console.log('EMIT', ev)
8        return super.emit(ev, ...data)
9      }
10      write(chunk, encoding, callback) {
11        console.log('WRITE', chunk, encoding)
12        return super.write(chunk, encoding, callback)
13      }
14      end(chunk, encoding, callback) {
15        console.log('END', chunk, encoding)
16        return super.end(chunk, encoding, callback)
17      }
18    })()
19  )
20  .pipe(someDest)

subclass that defers 'end' for some reason

1class SlowEnd extends Minipass {
2  emit(ev, ...args) {
3    if (ev === 'end') {
4      console.log('going to end, hold on a sec')
5      setTimeout(() => {
6        console.log('ok, ready to end now')
7        super.emit('end', ...args)
8      }, 100)
9      return true
10    } else {
11      return super.emit(ev, ...args)
12    }
13  }
14}

transform that creates newline-delimited JSON

1class NDJSONEncode extends Minipass {
2  write(obj, cb) {
3    try {
4      // JSON.stringify can throw, emit an error on that
5      return super.write(JSON.stringify(obj) + '\n', 'utf8', cb)
6    } catch (er) {
7      this.emit('error', er)
8    }
9  }
10  end(obj, cb) {
11    if (typeof obj === 'function') {
12      cb = obj
13      obj = undefined
14    }
15    if (obj !== undefined) {
16      this.write(obj)
17    }
18    return super.end(cb)
19  }
20}

transform that parses newline-delimited JSON

1class NDJSONDecode extends Minipass {
2  constructor(options) {
3    // always be in object mode, as far as Minipass is concerned
4    super({ objectMode: true })
5    this._jsonBuffer = ''
6  }
7  write(chunk, encoding, cb) {
8    if (
9      typeof chunk === 'string' &&
10      typeof encoding === 'string' &&
11      encoding !== 'utf8'
12    ) {
13      chunk = Buffer.from(chunk, encoding).toString()
14    } else if (Buffer.isBuffer(chunk)) {
15      chunk = chunk.toString()
16    }
17    if (typeof encoding === 'function') {
18      cb = encoding
19    }
20    const jsonData = (this._jsonBuffer + chunk).split('\n')
21    this._jsonBuffer = jsonData.pop()
22    for (let i = 0; i < jsonData.length; i++) {
23      try {
24        // JSON.parse can throw, emit an error on that
25        super.write(JSON.parse(jsonData[i]))
26      } catch (er) {
27        this.emit('error', er)
28        continue
29      }
30    }
31    if (cb) cb()
32  }
33}