ts-orc (tshy@1.12.0)

This package exposes most of the functions in the tshy under ts-orc/tasks so you can create your own build process.

If you want a simple and direct way of compiling your typescript project to commonjs and esm you can simply use the original project. Although this project does provide a tso command which is identical to the original, the tshy project is more likely to get frequent updates.

If you decide to use this one, you can install it with:

npm i -D ts-orc

I'll at least write my own documentation but, for now, here's tshy original README.

tshy - TypeScript HYbridizer

Hybrid (CommonJS/ESM) TypeScript node package builder. Write modules that Just Work in ESM and CommonJS, in easy mode.

This tool manages the exports in your package.json file, and builds your TypeScript program using tsc 5.2, emitting both ESM and CommonJS variants, providing the full strength of TypeScript’s checking for both output formats.

USAGE

Install tshy:

npm i -D tshy

Put this in your package.json to use it with the default configs:

1{
2  "files": ["dist"],
3  "scripts": {
4    "prepare": "tshy"
5  }
6}

Put your source code in ./src.

The built files will end up in ./dist/esm (ESM) and ./dist/commonjs (CommonJS).

Your exports will be edited to reflect the correct module entry points.

Dual Package Hazards

If you are exporting both CommonJS and ESM forms of a package, then it is possible for both versions to be loaded at run-time. However, the CommonJS build is a different module from the ESM build, and thus a different thing from the point of view of the JavaScript interpreter in Node.js.

Consider this contrived example:

1// import the class from ESM
2import { SomeClass } from 'module-built-by-tshy'
3import { createRequire } from 'node:module'
4const req = createRequire(import.meta.url)
5
6// create an object using the commonjs version
7function getObject() {
8  const { SomeClass } = require('module-built-by-tshy')
9  return new SomeClass()
10}
11
12const obj = getObject()
13console.log(obj instanceof SomeClass) // false!!

In a real program, this might happen because one part of the code loads the package using require() and another loads it using import.

The Node.js documentation recommends exporting an ESM wrapper that re-exports the CommonJS code, or isolating state into a single module used by both CommonJS and ESM. While these strategies do work, they are not what tshy does.

What Does tshy Do Instead?

It builds your program twice, into two separate folders, and sets up exports. By default, the ESM and CommonJS forms live in separate universes, unaware of one another, and treats the "Dual Module Hazard" as a simple fact of life.

Which it is.

"Dual Module Hazard" is a fact of life anyway

Since the advent of npm, circa 2010, module in node have been potentially duplicated in the dependency graph. Node's nested node_modules resolution algorithm, added in Node 0.4, made this even easier to leverage, and more likely to occur.

So: as a package author, you cannot safely rely on there being exactly one copy of your library loaded at run-time.

This doesn't mean you shouldn't care about it. It means that you should take it into consideration always, whether you are using a hybrid build or not.

If you need to ensure that exactly one copy of something exists at run-time, whether using a hybrid build or not, you need to guard this with a check that is not dependent on the dependency graph, such as a global variable.

1const ThereCanBeOnlyOne = Symbol.for('there can be only one')
2const g = globalThis as typeof globalThis & {
3  [ThereCanBeOnlyOne]?: Thing
4}
5import { Thing } from './thing.js'
6g[ThereCanBeOnlyOne] ??= new Thing
7export const thing = g[ThereCanBeOnlyOne]

If you find yourself doing this, it's a good idea to pause and consider if you would be better off with a type check function or something other than relying on instanceof. There are certainly cases where it's unavoidable, but it can be tricky to work with.

Module Local State

There are some cases where you need something to be the same value whether loaded with CommonJS or ESM, but not necessarily unique to the entire program.

For example, say that there is some package-local set of data, and it needs to be updated and accessible whether the user is accessing your package via import or require.

In this case, we can use a dialect polyfill that pulls in the state module from a single dialect.

In Node, it's easy for ESM to load CommonJS, but since ESM cannot be loaded synchronously by CommonJS, I recommend putting the state in the polyfill, and having the "normal" module access it from that location.

For example:

1// src/index.ts
2import { state } from './state.js'
3export const setValue = (key: string, value: any) => {
4  state[key] = value
5}
6export const getValue = (key: string) => state[key]

1// src/state-cjs.cts
2// this is the actual "thing"
3export const state: Record<string, any> = {}

1// src/state.ts
2// this is what will end up in the esm build
3// need a ts-ignore because this is a hack.
4//@ts-ignore
5import cjsState from '../commonjs/state.js'
6export const { state } = cjsState as { state: Record<string, any> }

If you need a provide an ESM dialect that doesn't support CommonJS (eg, deno, browser, etc), then you can do this:

1// src/state-deno.mts
2// can't load the CJS version, so no dual package hazard
3export const state: Record<string, any> = {}

See below for more on using dialect specific polyfills.

Handling Default Exports

export default is the bane of hybrid TypeScript modules.

When compiled as CommonJS, this results in creating an export named default, which is not the same as setting module.exports.

1// esm, beautiful and clean
2import foo from 'foo'
3// commonjs, unnecessarily ugly and confusing
4// even if you like it for some reason, it's not "the same"
5const { default: foo } = require('foo')

You can tell TypeScript to do a true default export for CommonJS by using export = <whatever>. However:

• This is not compatible with an ESM build.
• You cannot export types along with it.

In general, when publishing TypeScript packages as both CommonJS and ESM, it is a good idea to avoid default exports for any public interfaces.

• No need to polyfill anything.
• Can export types alongside the values.

However, if you are publishing something that does need to provide a default export (for example, porting a project to hybrid and/or TypeScript, and want to keep the interface consistent), you can do it with a CommonJS polyfill.

1// index.ts
2// the thing that gets exported for ESM
3import { thing } from './main.ts'
4import type { SomeType } from './main.ts'
5
6export default thing
7export type { SomeType }

1// index-cjs.cts
2// the polyfill for CommonJS
3import * as items from './main.ts'
4declare global {
5  namespace mything {
6    export type SomeType = items.SomeType
7  }
8}
9export = items.thing

Then, CommonJS users will get the appropriate thing when they import 'mything', and can access the type via the global namespace like mything.SomeType.

But in almost all cases, it's much simpler to just use named exports exclusively.

Configuration

Mostly, this just uses opinionated convention, and so there is very little to configure.

Source must be in ./src. Builds are in ./dist/commonjs for CommonJS and ./dist/esm for ESM.

There is very little configuration for this, but a lot of things can be configured.

exports

By default, if there is a src/index.ts file, then that will be set as the "." export, and the package.json file will be exported as "./package.json", because that's just convenient to expose.

You can set other entry points by putting something like this in your package.json file:

1{
2  "tshy": {
3    "exports": {
4      "./foo": "./src/foo.ts",
5      "./bar": "./src/bar.ts",
6      ".": "./src/something-other-than-index.ts",
7      "./package.json": "./package.json"
8    }
9  }
10}

Any exports pointing to files in ./src will be updated to their appropriate build target locations, like:

1{
2  "exports": {
3    "./foo": {
4      "import": {
5        "types": "./dist/esm/foo.d.ts",
6        "default": "./dist/esm/foo.js"
7      },
8      "require": {
9        "types": "./dist/commonjs/foo.d.ts",
10        "default": "./dist/commonjs/foo.js"
11      }
12    }
13  }
14}

Any exports that are not within ./src will not be built, and can be anything supported by package.json exports, as they will just be passed through as-is.

1{
2  "tshy": {
3    "exports": {
4      ".": "./src/my-built-module.ts",
5      "./package.json": "./package.json"
6      "./thing": {
7        "import": "./lib/thing.mjs",
8        "require": "./lib/thing.cjs",
9        "types": "./lib/thing.d.ts"
10      },
11      "./arraystyle": [
12        { "import": "./no-op.js" },
13        { "browser": "./browser-thing.js" },
14        { "require": [{ "types": "./using-require.d.ts" }, "./using-require.js"]},
15        { "types": "./blah.d.ts" },
16        "./etc.js"
17      ]
18    }
19  }
20}

Package #imports

You can use "imports" in your package.json, and it will be handled in the following ways.

Any "imports" that resolve to a file built as part of your program must be a non-conditional string value pointing to the file in ./src/. For example:

1{
2  "imports": {
3    "#name": "./src/path/to/name.ts",
4    "#utils/*": "./src/path/to/utils/*.ts"
5  }
6}

In the ESM build, import * from '#name' will resolve to ./dist/esm/path/to/name.js, and will be built for ESM. In the CommonJS build, require('#name') will resolve to ./dist/commonjs/path/to/name.js and will be built for CommonJS.

If there are any "imports" that resolve to something not built by tshy, then tshy will set scripts.preinstall to set up symbolic links at install time to make it work. This just means that you can't use scripts.preinstall for anything else if you have "imports" that aren't managed by tshy. For example:

1{
2  "imports": {
3    "#dep": "@scope/dep/submodule",
4    "#conditional": {
5      "types": "./vendor/blah.d.ts",
6      "require": "./vendor/blah.cjs",
7      "import": "./vendor/blah.mjs"
8    }
9  }
10}

If a tshy.imports is present (a previous iteration of this behavior), it will be merged into the top-level "imports" and deleted from the tshy section.

Making Noise

On failure, all logs will be printed.

To print error logs and a success! message at the end, set TSHY_VERBOSE=1 in the environment.

To print debugging and other extra information, set TSHY_VERBOSE=2 in the environment.

Selecting Dialects

You can tell tshy which dialect you're building for by setting the dialects config to an array of strings:

1{
2  "tshy": {
3    "dialects": ["esm", "commonjs"]
4  }
5}

The default is ["esm", "commonjs"] (ie, both of them). If you set it to just one, then only that dialect will be built and exported.

Suppressing the self-link

See below about Local Package exports for an explanation of what this is.

Suppress the symlink to the project folder into a node_modules folder in dist and src by doing this:

1{
2  "tshy": {
3    "selfLink": false
4  }
5}

If the selfLink config is not explicitly set, and creating the symlink fails (common on Windows systems where fs.symlink() may require elevated permissions), then the error will be ignored.

Old Style Exports

Versions of node prior to 12.10.0, published in early to mid 2016, did not have support for exports as a means for defining package entry points. Unfortunately, even 7 years later at the time of this writing, some projects are still using outdated tools that are not capable of understanding this interface.

If there is a commonjs export of the "." subpath, and the tshy.main field in package.json is not set to false, then tshy will use that to set the main and types fields, for compatibility with these tools.

Warning: relying on top-level main/types will likely cause incorrect types to be loaded in some scenarios.

Use with extreme caution. It's almost always better to not define top-level main and types fields if you are shipping a hybrid module. Users will need to update their module and moduleResolution tsconfigs appropriately. That is a good thing, and will save them future headaches.

If the commonjs dialect is not built, or if a "." export is not created, or if the "." export does not support the commonjs dialect, and main is explicitly set to true, then the build will fail.

For example, this config:

1{
2  "tshy": {
3    "exports": {
4      ".": "./src/index.ts"
5    }
6  }
7}

will produce:

1{
2  "main": "./dist/commonjs/index.js",
3  "types": "./dist/commonjs/index.d.ts",
4  "type": "module",
5  "exports": {
6    ".": {
7      "require": {
8        "types": "./dist/commonjs/index.d.ts",
9        "default": "./dist/commonjs/index.js"
10      },
11      "import": {
12        "types": "./dist/esm/index.d.ts",
13        "default": "./dist/esm/index.js"
14      }
15    }
16  }
17}

CommonJS Dialect Polyfills

Sometimes you have to do something in different ways depending on the JS dialect in use. For example, maybe you have to use import.meta.url in ESM, but polyfill with pathToFileURL(__filename) in CommonJS.

To do this, create a polyfill file with the CommonJS code in <name>-cjs.cts. (The cts extension matters.)

1// src/source-dir-cjs.cts
2//     ^^^^^^^^^^--------- matching name
3//               ^^^^----- "-cjs" tag
4//                   ^^^^- ".cts" filename suffix
5// this one has a -cjs.cts suffix, so it will override the
6// module at src/source-dir.ts in the CJS build,
7// and be excluded from the esm build.
8import { pathToFileURL } from 'node:url'
9//@ts-ignore - Have to ignore because TSC thinks this is ESM
10export const sourceDir = pathToFileURL(__dirname)

Then put the "real" ESM code in <name>.ts (not .mts!)

You will generally have to //@ts-ignore a bunch of stuff to get the CommonJS build to ignore it, so it's best to keep the polyfill surface as small as possible.

1// src/source-dir.ts
2// This is the ESM version of the module
3//@ts-ignore
4export const sourceDir = new URL('.', import.meta.url)

Then in your code, you can just import { sourceDir } from './source-dir.js' and it'll work in both builds.

Excluding from a build using .cts and .mts files

Files named *.mts will be excluded from the CommonJS build.

Files named *.cts will be excluded from the ESM build.

If you need to do something one way for CommonJS and another way for esm, use the "Dialect Switching" trick, with the ESM code living in src/<whatever>.ts and the CommonJS polyfill living in src/<whatever>-cjs.cts.

Excluding Files Entirely From All Builds

If you want to keep some files from being processed by tshy's builds entirely, you can add an exclude string[] field to the tshy object in package.json. For example:

1{
2  "tshy": {
3    "exclude": ["src/**/*.test.ts"]
4  }
5}

Other Targets: browser, deno, etc

If you have any other dialects that you'd like to support, you can list them as either commonjsDialects or esmDialects, depending on whether you want them to be built as CommonJS or ESM.

Note that each added dialect you create will result in another build in the ./dist folder, so you may wish to use sparingly if shipping a large project.

For example:

1{
2  "tshy": {
3    "exports": {
4      ".": "./src/index.ts"
5    },
6    "esmDialects": ["deno", "browser"],
7    "commonjsDialects": ["webpack"]
8  }
9}

Will result in:

1{
2  "exports": {
3    ".": {
4      "deno": {
5        "types": "./dist/deno/index.d.ts",
6        "default": "./dist/deno/index.js"
7      },
8      "browser": {
9        "types": "./dist/browser/index.d.ts",
10        "default": "./dist/browser/index.js"
11      },
12      "webpack": {
13        "types": "./dist/webpack/index.d.ts",
14        "default": "./dist/webpack/index.js"
15      },
16      "require": {
17        "types": "./dist/commonjs/index.d.ts",
18        "default": "./dist/commonjs/index.js"
19      },
20      "import": {
21        "types": "./dist/esm/index.d.ts",
22        "default": "./dist/esm/index.js"
23      }
24    }
25  }
26}

In each of these, you can use the same kind of dialect override that works for CommonJS polyfills described above. For commonjsDialects types, create a file named <filename>-<dialect>.cts, and for esmDialects types, create a file named <filename>-<dialect>.mts.

For example, to provide deno, browser, and webpack overrides in the setup above, the following files would be relevant:

src/index.ts           # normal esm/cjs version
src/index-cjs.cts      # cjs variant for default commonjs
src/index-browser.mts  # esm variant for the browser
src/index-deno.mts     # esm variant for deno
src/index-webpack.cts  # cjs variant for webpack

Note that the commonjs override uses the abbreviated cjs name (historical reasons, it was originally the only override supported), and that the file extension must be cts or mts depending on the dialect type that it is.

Atomic Builds

Code is built in ./.tshy-build and then copied over only if the build succeeds. This makes it work in monorepo cases where you may have packages that depend on one another and are all being built in parallel (as long as they've been built one time, of course).

If you use "incremental": true in your tsconfig, then this folder will persist, so that TSC can benefit from the .tsbuildinfo files it creates in there.

Exports Management

The exports field in your package.json file will be updated based on the tshy.exports configuration, as described above.

If you don't provide that config, then the default is:

1{
2  "tshy": {
3    "exports": {
4      ".": "./src/index.ts",
5      "./package.json": "./package.json"
6    }
7  }
8}

TSConfigs

Put whatever configuration you want in tsconfig.json, with the following caveats:

• include - will be overridden based on build, best omitted
• exclude - will be overridden based on build, best omitted
• compilerOptions:
  • outDir - will be overridden based on build, best omitted
  • rootDir - will be set to ./src in the build, can only cause annoying errors otherwise.
  • target - will be set to es2022
  • module - will be set to NodeNext
  • moduleResolution - will be set to NodeNext

If you don't have a tsconfig.json file, then one will be provided for you.

Then the tsconfig.json file will be used as the default project for code hints in VSCode, neovim, tests, etc.

Custom project

Configure tshy.project if you want tshy to extend from a custom tsconfig file. This is often useful when you have multiple tsconfig files for different tools:

• A default tsconfig.json for typechecking and type-aware typescript-eslint, specifying "noEmit": true and "include": ["**/*.ts"]
• A tsconfig.build.json for compilation, with "noEmit": false. Note that the caveats above still apply.

1{
2  "tshy": {
3    "project": "./tsconfig.build.json"
4  }
5}

src/package.json

As of TypeScript 5.2, the only way to emit JavaScript to ESM or cjs, and also import packages using node-style "exports"-aware module resolution, is to set the type field in the package.json file closest to the TypeScript source code.

During the build, tshy will create a file at src/package.json for this purpose, and then delete it afterwards. If that file exists and wasn't put there by tshy, then it will be destroyed.

Local Package exports

In order to facilitate local package exports, tshy will create a symlink to the current package temporarily in ./src/node_modules and permanently in ./dist/node_modules.

If you rely on this feature, you may need to add a paths section to your tsconfig.json so that you don't get nagged constantly by your editor about missing type references.

You can suppress the self-linking by putting this config in package.json but be advised this means that you won't be able to import from local package exports:

1{
2  "tshy": {
3    "selfLink": false
4  }
5}

1{
2  "name": "@my/package",
3  "exports": {
4    "./foo": {
5      "import": "./lib/foo.mjs",
6      "require": "./lib/foo.cjs"
7    }
8  }
9}

1{
2  "compilerOptions": {
3    "paths": {
4      "@my/package/foo": ["./src/foo.js"],
5      "@my/package/bar": ["./src/bar.js"]
6    }
7  }
8}

1{
2  "compilerOptions": {
3    "paths": {
4      "@my/package/*": ["./src/*.js"]
5    }
6  }
7}